Two-component Adhesive for Glulam Wood

Short Description:

Two-component  Cold press lamination adhesive for solid hard wood Glulam  Application The product is the water-base resin goods, with worldwide advanced technology and special production process. It is safe and environmental, good waterproof performance, acid and alkali resistance. DS-06 glue It mainly apply to the solid wood furniture ,like laminated wood, particle board, door panel jointing, and solid wood, door pocket, door line banding, or other wooden block gluing etc., and for splicing...


  • Voltage: AC380V/50HZ/3Phase
  • Min.Order Quantity: 1Piece/Pieces
  • Trading Terms: FOB, CIF
  • Port: Foshan
  • Payment Terms: T/T,L/C
  • Product Detail

    Product Tags

    Two-component  Cold press lamination adhesive for solid hard wood Glulam 

    Application
    The product is the water-base resin goods, with worldwide advanced technology and special production process. It is safe and environmental, good waterproof performance, acid and alkali resistance.
    DS-06 glue It mainly apply to the solid wood furniture ,like laminated wood, particle board, door panel jointing, and solid wood, door pocket, door line banding, or other wooden block gluing etc., and for splicing various kind of woods, like Birch, oak, pine, elm, white ash, hybrid woods, and so on, except rosewood
    3de94bfc QQ图片20191231143554_副本

     Technical Data
    Part A Component – Base Resin
    Appearance: Milky viscous liquid
    Solid Content:≥50±1
    Viscosity:12000-15000cps.s
    Part B Component – Curing Agent
    Appearance: Puce or dark brownTools Requirement
    1.Use plastic box or the other containers for glue preparation
    2.Glue brush or hand-auto glue applicator
    3. Curing fixture and hot-press equipment (high frequency equipment)Wood Requirement

    1.Wood Moisture Adjustment 

     Adjust the moisture content of wood, adopt by dry machine adjustment 8%~12%, controlled it within 0.5% is the best status; keep the wood 20~35 degree centigrade, 50~65% relative humidity for 5~10 days, measure the water content during processing, until it is qualified.

    2. Wood Processing and Surface Treatment
    When you processing the log cutting, should pay attention the orthodromic of wood texture, as this also has the big influence of cracking problem for solid wood furniture.
    Surface moulding, roughness should be less than 0.1mm/m. Curved wood making, the gap between two parts of wood should be less than 0.1mm. Please keep it clean, oilless, dust-free, waterless, and non concave-convex or uncurved status.
    After fresh gluing, planer processing, it will be joint within 3~4 hours

    Mix proportions and Usage

    1. Part A and Part B component according to 100:10~15weigh in mix: structural type wood can match 100:18(according to the soft or hard of wood).

    2. Fully stir, total number of matching materials should be less than 4kg, homogeneous mix, manually stir should more than 3mins, the electrically stir about 60 mins.

    3.The volume of glue is 180~250g/m2,need single side gluing, for structural wood need double side gluing

    4.To keep the glue fresh, please do not make excessive glue preparation. Please use it within 40mins after mixing, the best to keep it in 20 degree centigrade. Please do not use it under the 5 degree centigrade. Also the opening time can not be more than 3mins.

    Curing

    1. Put on clamps(tongs) after gluing
    2. Pressure: Hard Wood 0.8~1.2 Mpa Soft Wood 0.5~0.8 Mpa
    3. If Use High frequency press time is 3~4mins
    4. After curing, few glue remain with hardness (plastic feeling on hand), so you can take away the clamps

    Attention

    1. After curing, can start the next procedure should be 24hours later. curing 7days later ,can do Japan JAS Standard Impregnation or Boiling Water Resistance transpression peeling test.
    2. Part B component should keep away from eyes, skin and soft tissues. If be contaminated, please rinse well with water timely.

    Sample
    1f12de63

    glue for wood board

    Packing & Delivery
    package

  • Previous:
  • Next:

  • Related Products