What focus on when selecting flooring ?

What we should focus on when selecting flooring ?

flooring

Selecting the right species

The relative humidity of a normal domestic environment is likely to range between 35% and 65% over a yearly cycle, and wood floors will shrink and swell in response to these conditions.

By selecting an appropriate species of timber, you can control dimensional movement occurring over the lifetime of the floor. For most domestic environments, species with medium movement characteristics will give you a floor with acceptable levels of movement. 

Installation over under floor heating

For installations over under floor heating, it is essential you limit the selection of species to those with small movement characteristics. Maximum board widths of 75mm are normally recommended for under floor heating installations, although wider commercial products are becoming available which may require special precautions to avoid in-service movement. You must also ensure that the moisture content of boards intended for under floor heating installations is between 6% and 8% when the floor is laid.

floor install

Wear resistance

Different species of flooring will provide different levels of wear resistance and you must give this some consideration for floors which are subjected to different levels of trafficking.

Thickness of boards

When fixing wood strip or boards onto support battens or joists, you must select a thickness of board which is appropriate to the span of the batten or joist in order to avoid deflection and squeaking of the floor.

Belown suggestions for referance

Timber species and dimensional movement

Movement classification

Commonly used species

Small

iroko, teak, merbau, American mahogany, dark red meranti, western hemlock

Medium

ash, European oak, American white oak, maple, sycamore, European redwood/whitewood, European cherry

Large

beech, birch, sweet chestnut

Wear resistance by species

Level of pedestrian traffic

Suggested species to use

Light (domestic environments, small classrooms, small offices).

idigbo, European birch, Douglas fir, Scots pine and light red meranti

Normal (large assembly halls, school/college classrooms, hospitals, hotels, shops)

teak, afzelia, iroko, dark red meranti, keruing, merbau and sapele

Heavy (usually concentrated in definite traffic lanes in large public institutions)

European beech, European oak and rock maple

Batten and joist spans for domestic/residential environments

Finished board thickness (mm)

Maximum span (centre to centre in mm)

16

505

19

600

21

635

28 790

Resource from Wood Campus

(P.S: Our Keychain new product- four side moulder with sawing function ML620D , which is a professional solution for big production volume of wooden panels, flooring ,sauna board, production line, achieving higher efficient, and lowerlabor cost, for more details you could check our web .)


Post time: Aug-29-2017