M450 Double Side Planer
Double side planer 450mm and 610mm working width wood planer machine , which is mainly used for processing wood square, board, adornment wood line, top and down sides for planing light treatment, with three different kinds of planer
1. The work surface is made of hard chrome plating, smooth and wear-resistant.
2.Model B planner equipped with the original spiral knife, Model A planner equipped with domestic famous white steel blades, Model C planer equipped with heavy cut 15x15x37° 6pcs spiral cutter
3. The active feed rollers under the workbench ensure feeding smoothly.
4.The digital input mode makes the operation simple and convenient; At the same time it adopts back up manually operated.
5.The front platen of horizontal knife fitted with tracking capabilities, no matter how much the wood processing amount it is, it can ensures feeding smoothly.
6.When the equipment retrofitting short material guiding device: the shortest processing length is 130mm.
7.The lower level knife shaft sets an axis limit, which can prevent dislocation after blade replacement
8. The lifting system sets two trip switches to protect against stroke switch failure bashing the tool when it drops
9. when the oil pump runs out of oil, the alarm light will automatically prompts alarm, after refueling finished, the alarm light will turn off .
10. Feeding adopting stepless speed and the range is 5-16m
11. The electrical appliances equipped with phase sequence protection, electrical appliances protection makes the device couldn’t start when it picks the wrong positive & negative, you need to exchange the correct wiring before starting
|Max Working Width:||
|Top Spindle Power:||
|Max Working Thickness:||
|Bottom Spindle Power:||
|Min Working Thickness:||
|Feeding Motor Power:||
|Min Working Length:||
|Elevating Motor Power:||
|Spindle Rotation Rate:||
Double Side Machine on Production Line
Wooden box package